5 Ton Heavy Loads Rail Guided Vehicle Material Handling Equipment

• Customization: Available
• After-sales Service: 1 Year
• Warranty: 12 Month
• Model NO.: BJT
• Product Name: Material Handling Equipment
• Power Mode: Trailing Cable
• Running Speed: 0-20m/Min
• Color: Red, Black, Yellow, Blue
• Load Capacity: 1-300 Ton
• Application: Steel Industry, Factory, Warehouse, Port
• Control Mode: Pendant/Remote Controller
• Material: Q235B
• Safety Device: Alarm Light, Buffer, Radar Detector, etc.
• Transport Package: The Whole Cart Will Be Packed by Tarp.
• Specification: Customized
• Trademark: PERFECT
• Origin: Xinxiang
• HS Code: 84289090
• Production Capacity: 50 Sets/Month
• Package Size: 2000.00cm * 1000.00cm * 400.00cm
• Package Gross Weight: 3000.000kg

Product Description

5 Ton Heavy Loads Rail Guided Vehicle Material Handling Equipment

 

 

Product Description

Introduction of Material Handling Equipment

Our line of Material Handling Equipment is designed to accommodate the needs of a wide range of industries such as steel, aluminum, automotive, stamping, heavy manufacturing and several others. These units are designed to operate on floor mounted rails and are used to transport heavy materials across crane bays or in areas not serviced by an overhead crane.

Detailed Photos

Application

Application of Material Handling Equipment

The cable reel powered Material Handling Equipment is mainly applied in assembly line (ring production line,  loop production line), metallurgy industry (steel ladle), warehouse transport, ship industry (maintenance, assemble, container transport), workpiece transport in workshop, lathe transport, steel factory (steel billet, steel plate, steel coil, steel pipe, section steel, steel structure), construction (bridge, simple building, concrete, concrete column), petroleum industry (oil pump, sucker rod and parts), energy (polycrystalline silicon, generator, windmill), chemical industry(electrolytic cell, retort etc), railway (rail maintenance, rail welding, train tractor).

Working Principle of Material Handling Equipment

This Motorized Material Handling Equipment is powered by cable. The power source 380-690v AC leaded into electrical control cabinet by cable, which controls the motor to make the cart start, stop, move forward and move backward. Hydraulic lifting system  and other accessories can be mounted on the car to meet the demand for working. The Motorized Material Handling Equipment is suitable for running distance less than 50m, high using frequency.

 

Product Parameters

Parameter of Material Handling Equipment

Model		BJT-2t	BJT-20t	BJT-50t	BJT-100t	BJT-150t
Rated Load(t)		2	20	50	100	150
Table Size (mm)	Length(L)	2000	4000	5500	6500	10000
	Width(W)	1500	2200	2500	2800	3000
	Height(H)	500	600	700	1000	1200
Wheel Base(mm)		1200	2800	4200	4900	7000
Rail Inner Gauge(mm)		1200	1435	1435	200	2000
Wheel Diameter(mm)		270	350	500	600	600
Wheel Quantity		4	4	4	4	8
Ground Clearance(mm)		50	50	50	75	75
Running Speed (m/min)		0-25	0-20	0-20	0-20	0-18
Motor Power(kw)		0.8	2.5	5.5	11	15
Running Distance (m)		25	30	50	50	50
Recommended Rail Model		P15	P24	P43	QU100	QU100

Machining Of Material Handling Equipment
CNC Cutting
Transport the steel plate from raw material warehouse to CNC cutting workshop for cutting. After the cutting, the workers will do some simple processing such as chip moving and setting out.
Preliminary Assembling
Put the cut steel plate together according to the design drawing
Welding
Weld the steel plate with automatic welding machine after the preliminary assembling
Post weld treatment
Test the welding section after the welding, polish and burring. Post weld treatment to eliminate welding stress
Spray Primer
Transport the structure part after processing to painting booth for spraying primer. The main component of the primer is zinc rich epoxy antirust paint. The primer is to two layers
Assembling
Assemble the structure parts after spraying primer with wheels, motors and gear box, etc.
Paint finish
Transport the assembled cart to painting booth, inspect the integrity of primer. After that paint the finish
Debugging
Debugging the cart after painting the finish with electric control system, after the debugging, the cart will test without load. And after the no load test, the cart will be tested with load. After the inspection, the cart will be transported to storage area.

 

Packaging & Shipping

Packaging and Shipping of Material Handling Equipment

*For length is less than 6m, the width is less than 2.2m. It will be transported by 20ft container. If the length is longer than 5.9m and less than 12m, it will be transported by 40ft container. If the quantity is 2 sets or 3 sets, they can be transported by full container. If the quantity is 1 set, it can be transported by LCL Container.
*If the length is less than 12m, the width is beyond 2.2m. It needs to be transported by flat rack (20 or 40 ft) . If the equipment is beyond above dimension, and quantity need to consider bulk cargo.



Factory and Customer
Certificates and Service
If you have any question, please feel free to contact us.